Iron On Non Glitter Labels

Care guide – WASH UP TO 40 DEGREES DO NOT TUMBLE DRY!

How to look apply and care for your Non Glitter Iron On Labels. IMPORTANT: Please do not iron directly onto the heat transfer application film or tape. If you have any issues during application please do not throw any parts away and contact us to discuss the issue.

What’s Included?
Your decal, 1 x sheet of greaseproof paper, 1 x sheet of clear heat transfer film. If your order has more than one decal the transfer tape can be reused for multiple labels.

Please watch these tutorials for help with the application.

Tutorial 1

Tutorial For Double Layer Labels

Tutorial For Sports Iron Ons

Tutorial For Uniform Labels

Transfer

Place a piece of heat transfer film over your decal. Rub gently and then lift, this should remove your decal from the backing paper and onto the transfer tape. Place your decal onto the garment and firmly press down

Heat

Check your iron’s heat range. Turn off the steam function and adjust the temperature to a setting that is between 160 and 200 degrees.

Temperature

If your iron does not reach 160 degrees the label will not adhere to the fabric. If you set the iron too hot this may melt the label. Please check your settings and temperatures carefully.

Application

Place a sheet of greaseproof paper over the top of the area. Iron firmly in bursts of 5 seconds, checking the label after each turn.

Application

Once fully adhered slowly remove the transfer tape. Place the silicone paper back over the decal and iron again for 5 seconds. Please wait 24 hours before washing your garment.

Two Layers

If your decal has 2 colours repeat this process for the second decal layer.